7
6
When there is impeding noise that disturbs conversation from the door camera,
pressing and holding the “PTT” button will deliver only the voice of the speaker from
the CDV-50AM to the door camera unit to help clarify speech.
Priority Calling
1. Entrance Image Saving
While in monitoring mode, holding the “Monitor Button (REC)” for 2 seconds will
display the words “Record” on the top left of the screen. At this time, 1 image cut of
the entrance screen will be taken.
2. Review Function Setup
While in standby mode, pressing and holding the “PTT Button” for 2 seconds will
display the menu screen as shown in the picture below.
2-1 Review
While in review mode, the screen will show the image of the camera as displayed
in the example below. At this time, the buttons/options on the right side of the screen
will appear.
2-2 Delete All Image
The “Delete All Image” option will erase all saved images.
Note :
If no image has been saved, then the “No Image” message will be appear.
Note :
The five functions listed under “A” correspond to the product’ s buttons positioned
on the monitor. (i.e. “Hide”
“Monitoring Button”, “Prev”
Interphone Button”,
and the “UP arrow key”
the “Call Button”, etc.)
Note :
The five functions listed under “A” correspond to the product’ s buttons positioned
on the monitor. (i.e. “Exit”
“Monitoring Button”, “Prev”
“Interphone Button”,
and the “UP arrow key”
the “Call Button”, etc.)
The five menu options are under “B” navigated by functions under “A”
The picture seen above shows the main menu used to access and setup image memory.
Picture 1. Main menu
Picture 2. Review
Menu
Exit
Prev
SEL
A
B
Review
Delete All Images
Auto Record Setting
Time Setting
Cam Setting
Picture 3 Delete Image
Exit
Prev
SEL
A
A
YES
Delete All Images?
NO
2007-08-14 11: 12 : 33
Hide
Prev
DEL
1/128
