9
Preparing for use
Installing the Charger
Range
Depending on the ambient conditions, the outdoor range is approx.
300 m. The indoor range is approx. 50 m depending on the
construction of the building.
Connecting
1. Insert the small plug on power supply unit and the small plug on
telephone cable into the appropriate sockets on the bottom of the
Charger
2. Place cables in each cable duct
.
Installing the handset
Inserting the batteries
1. Open battery compartment and insert included batteries. Make
sure poles are correct.
2. To close, slide the cover onto the battery compartment until it
closes tight.
Charging the batteries
The included batteries are not charged. To charge, place the handset
in the Charger. You will hear a signal tone of the handset to confirm
that the batteries are being charged.
The charging status symbol on the handset indicates the charging
status of the batteries:
NOTE : Please charge the batteries 8hours at list just after you
buy.
The time of full charging is 8 hours at list.
Batteries empty
Batteries 1/3 charged
Batteries 2/3 charged
Batteries full
