When the security bell rings, after checking whether it is real or not, by pressing ‘away’ button once,
you can turn off away mode and can return to
initial state with LED blinking and alert tone stopped.
(When the security bell rings , the release / return is only possible when the sensor is in the normal
state, that is, in case of crime security 1, in the state where the contact of the magnetic sensor is
made, in case of crime security 2, only when the motion detecting sensor does not detect any
movement or intruder.)
3-
7
. Bypass call function [used with away mode]
●
When householde sets away mode, visitor at lobby or door camera is automatically connected to
guard station.
(In this case, volume of the call can be lower as it is bypassing another route.)
3-
8
. ALARM1( fire ) function
(1)
When alert1 sensor detects fire, alarm tone rings
(Fire engine sound) at guard station and monitor
(2)
After checking alert situation is terminated, press away
button twice.
(One time: release/ two times: return), after return, front
LED blinking and security 2 alert tone stops.)
8
(2)
How to turn off the away set
After return, by pressing ‘away button’ once, the entire front LED stops blinking and away mode is turned off
with ‘beep’ sound. The device delivers the away mode off message to guard station. It must be turned off
within the away mode off time.
(When released from factory, away mode off time is initially set for 0sec. You can change it from 0 to 90 sec
by pressing setting button.)
※
Notice: If you don`t turn the away mode off, the device will consider you as an intruder and
alert tone will ring
(3)
How to turn off the security bell
(1)
How to set Away set
①
When you press the 'away' button in standby mode, the "beep" sound occurs and the whole front
LEDs blink and Away mode is set
②
In the away mode, after away set time finishes, the household unit detects security sensor and
changes into security mode. The entire front LED stops blinking and remains turned on
③
After setting away mode, you should go out within set time.
( AWAY set time: It is initially set for 60 sec and you can change it from 0 to 90 sec by pressing
setting button.)
④
After away mode is set, if device detects something abnormal ( external incursion ), the entire front
LEDs Immediately flash and the security ring tone will be generated at the household unit and
guard unit
Away and security function enabled by connecting to Security 1(magnetic sensor) and Security 2(PIR
sensor)
3-
6
. Away and security function