8
9
8. Chime sound
Chime will sound when calling an individual door bell with audio type.
Note) The doors do not open by default password
“
1234
”
.
Only after changing default Password, can you use this function
1) Initialization for the password
(only the password for the Master unit is initialized)
①
Shut off master unit and turn it on again while holding the
“
extension call
”
button
and
“
Door release
”
button at the same time for 3 seconds at the same time.
②
The password will initialize to
“
1234
”
when the blink of LED stops.
Note : Default password : 1234
2) Changing Resident Password(From Multi Entry Panel)
①
Hold
“
Residence Number
”
and
“
”
button for 2 seconds
and release when LCD stops blinking.
②
Enter
“
Current password
”
.
③
Hold
“
”
button for 2 seconds and release when LCD stops blinking.
④
Enter
“
New Password
”
with 4 digits on Multi Entry Panel
displaying
“
NEW PW :
”
message.
⑤
Hold
“
”
button for 2 seconds and release when LCD stops blinking.
⑥
Repeat
“
New password
”
to confirm it.
⑦
Hold
“
”
button for 2 seconds and release when LCD stops blinking.
9. Changing and initialization of the password
Note) The doors do not open by default password
“
1234
”
.
Only after changing default Password, can you use this function
1) Open the entrance with resident password
①
Press resident number
”
and
“
”
button
②
Press PIN number and the
“
”
button
- The door opens with the
“
OPEN
”
message display on the LCD screen.
2) Open the entrance with Building password
①
Enter
“
9900
”
and
“
”
button
②
Enter the
“
Building password
”
and the
“
”
button
10. Opening the entrance of a Multi-entry Panel
With Password
⑤
Then, register the ID of the said residence,
and press
“
”
button to hear a sound of completion.
⑥
The registration is complete when you hang up the handset.
(Repeat this process for other residentes)
⑦
Set the ID’ as “1” on the Multi-Entry panel after completing the registration
