7
6
①
When calling from the Multi-Entry Panel, you will hear the COMMAX chime
and the image of the visitor will be shown on the screen
②
Pick up the handset to initiate conversation.
③
When opening the door of the Multi Entry Panel during a conversation,
press the
“
Door release
”
button and the entrance will open.
(The call conversation is ended right after the release of the door)
④
When conversation is over, hang up the handset.
2) Setting the Sub-Unit
①
Set the ID as
“
0
”
Multi-Entry panel which shold be connected to chanel 1
-The default of all Multi Entry Panels is assigned to
“
0
”
②
While picking up the handset of an in-house unit, press
“
extension call
”
button
and the
“
door open
”
button at the same time.
③
You can communicate with Multi Entry Panel while the resident
’
s
number displayed on it.
④
When the
“
*** -> S
”
message is displayed on the Multi Entry Panel
when you press the
“
Extension call
”
button on the in-house unit.
1) Setting Master
①
Set the ID as
“
0
”
on Multi-Entry panel which shold be connected to chanel 1
- The default of all Multi Entry Panels is assigned to
“
0
”
.
②
While picking up the handset of an in-house unit, press the
“
extension call
”
button and the
“
door release
”
button at the same time.
③
You can communicate with the Multi Entry Panel while the resident
’
s
number is displayed on it.
④
When the
“
*** -> M
”
message is displayed on the Multi Entry Panel
when you press the
“
Door Open
”
button on an in-house unit.
⑤
Then, register the ID of the shown residence,
and press
“
”
button to hear a sound of completion.
⑥
The registration is complete when you hang up the handset.
(Repeat this process for other residentes)
⑦
Set the ID’ as “1” on the Multi-Entry panel after completing the registration
3. Multi Entry Panel Calling
①
Pick up the handset and, press the
“
extension call button
”
,
to call to the sub unit.
②
When the sub unit responds, conversation occurs.
(calling both the Extension and Master unit is possible)
※
when calling to Guard station with another unit or while talking with
other Extension, another in-house unit can not make a call.
③
while talking with another extension unit and an incoming call from
the Multi-Entry panel arrives,
④
If this time, you have 30seccnds to answer the call from the Multi-Entry panel
by pressing the hook switch once on the extention unit(only one extention unit
can have a conversation with Multi-Entry panel at a time)
4. Sub unit calling (Intercommunication)
①
Pick up the handset and press the
“
Guard call
”
button to call the Guard Station.
②
When the guard station responds, conversation can occurs.
* The Guard station unit does not have a calling function, only receiving)
* If the Guard unit is on the line with another residence or Multi entry unit,
you will hear a busy tone)
5. Guard station or external area calling
This is applied to all calls and conversation.
①
Calling time lasts for 30 second.
②
Talking duration lasts for 60 second.
7. Setting In-House unit as a Master and Sub Unit
- This setting should be set by Muliti entry panel which should be connected to chanel 1
- when a single unit is installed, the setting should be set as a master unit.
in case more than 2 unit are installed one should be set as the master,
and the rest should be set as slave unit
- The “Door Release” and “Extension” button on the unit run as a selection
to master or slave in this mode
6. Call/ Talk duration