JULY. 19. 2002
560A
3
2. The horn will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming when interfaced with the security system.
SILENT ARMING / DISARMING:
Press the
+
button on the transmitter will arm or disarm your
security system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles
parking lights only.
DEFECTIVE SENSOR REMINDER:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood
lid ajar. (See Alarm Feature
“I
-
4
Programming)
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS:
Press the
button once: The siren chirps once, The system is armed.
Press the
button a second time within 5 seconds: The siren chirps twice, the Shock Sensor is now
bypassed.
The sensor bypass feature is programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle.
H. PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature, which allows the security system to arm 30
seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the
vehicle all entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
(See Alarm Feature
“I
-
2”
Programming):
The vehicle doors will automatically lock after passive arming cycle has been completed.
PASSIVE ARMING BY-PASS:
While the system disarmed. Press the
buttons twice, the security
will respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporally state
for as long as you wish. To exit passive by-pass, press the
or
button and the system will return
to normal status.
G. ACTIVE UNLOCK & DISARM:
1. Press
button on the transmitter.
2. The horn will chirp twice and parking light will flash twice to indicating that the security system is now
disarmed. The vehicle doors will unlock and dome light wills turns on for 30 seconds upon disarming
when interfaced with the security system.
TAMPER DISARMING
: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light flash
3 times.
PATHWAY ILLUMINATION
(See Alarm Feature
“II
-
4”
Programming): This feature turns the parking
light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal.
TWO STEPS DOOR UNLOCK
(See Alarm Feature
“III
-
3”
Programming):: This feature will
independently unlock the drives door only when disarming the security system. Pushing the
button a
second time within 3 seconds will unlock the entire vehicle.
AUTOMATIC RE-ARM
(See Alarm Feature
“
I
-
3”
Programming): If this feature is selected, the security
system will automatically re-arm itself 60 seconds after disarming with remote transmitter. Automatic rearm
will cancel if any door is opened before the 60 seconds timer has elapsed.
H. DISARMING WITHOUT A TRANSMITTER
The Override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to 'ON’ position.
2. Within 10 seconds push and release the valet switch
The alarm will enter the disarm mode. You can now start and operate the vehicle normally.
I. VALET MODE:
(System in Disarm or Valet mode)
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your
transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm
