Commando AirONE APO750, Руководство по настройке веб-интерфейса

Страница: 21 / 108

WIZARD
After clicking Wizard page, you can set device in Gateway Mode, Repeater Mode, WISP
and AP Mode (Default Selection). It provides flexibility to configure wireless AP’s operation
mode based on network scenario making this AP future proof. You are required to select
corresponding operation mode first before starting the configuration. Clicking Wizard will
pop up following page to configure the operation mode along with photos with
explanation for each operation mode.
Gateway Mode:
In Gateway mode, all Ethernet are bridged together, and wireless clients will connect ISP
access point or router connecting directly to the Internet via WAN PORT. NAT is enabled
and PCs in Ethernet LAN port share the same IP to ISP through wireless LAN.
WISP Mode:
In WISP mode, the device connects to ISP station or hot spot wirelessly to share network
with local wired and wireless devices.
Repeater Mode:
In Repeater mode is used to extend the range of wireless coverage of existing Wi-Fi
network. This mode is suitable when you are in a Wi-Fi dead-zone or a place with weak
wireless signal, and you want to have a larger effective range of the wireless signal
throughout your home or office.
AP Mode:
In AP mode, the device works as an access point to transform your existing wired
network into a wireless network.
2.1 Gateway Mode
In Gateway mode, your internet provider's RJ-45 is connected to WAN port of APO750.
Internet provider WAN setting can have Static IP, PPPoE, or DHCP accordingly select
option. Then configure the wireless parameters as per your choice of SSID, Channel
width, Encryption and Time reboot if required.