Commando AirONE AIR-CPE5K+, Руководство по настройке

Страница: 22 / 78

SETUP WIZARD
After clicking setup Wizard page, you can set device in Gateway Mode, Repeater Mode,
AP Mode & Super WDS Mode (Default Mode). It provides flexibility to configure wireless
bridge based on network scenario which makes this Bridge future proof. You are required
to select corresponding operation mode first before starting the configuration. Clicking
Wizard will pop up following page to configure the operation mode along with photos
with explanation for each operation mode.
Gateway Mode:
In Gateway mode, all Ethernet are bridged together, and wireless clients will connect ISP
access point or router connecting directly to the Internet via WAN PORT. NAT is enabled
and PCs in Ethernet LAN port share the same IP to ISP through wireless LAN.
Super WDS Mode:
A Wireless Distribution System (WDS) is a system that enables the wireless
interconnection of access points in an IEEE802.11ac/an/a network. It allows a wireless
network to be expanded using multiple access points without the need for a wired
backbone to link them, as is traditionally required. In Super WDS mode, device can act as
Bridge as well as AP both simultaneously and can connect other bridges and AP’s up to
maximum 4 devices.
Repeater Mode:
In Repeater mode is used to extend the range of wireless coverage of existing Wi-Fi
network. This mode is suitable when you are in a Wi-Fi dead-zone or a place with weak
wireless signal, and you want to have a larger effective range of the wireless signal
throughout your home or office.
AP Mode:
In AP mode, the device works as an access point to transform your existing wired
network into a wireless network
2.1 Gateway Mode
In Gateway mode, your internet provider's RJ-45 is connected to WAN port of AIR-
CPE5K+. Internet provider WAN setting can have Static IP, PPPoE, or DHCP accordingly
select option. Then configure the wireless parameters as per your choice of SSID,