FXS Operation
If you have a voice service provided by Commander which uses an FXS port you will
need to connect your phone(s) or compatible equipment to the ports labelled FXS0 or
FXS1 as required. Your administrator will have received information indicating which
voice services are presented to each FXS port. The below functions are available whilst
a call is in progress, you are able to hold, conference and transfer calls. Please see the
details below to highlight the codes used to perform these functions. To initiate these
functions, use the ‘Hook Flash’ or ‘Recall’ feature on your analogue telephone and then
dial the required digit/s. Please use phone cables included in the box or standard 2-wire
phone cables only.
What to dial
Function
Recall
Place a call on hold. A new call can be established at this point.
(Use Recall 2 to toggle between calls)
Recall 0
Reject a waiting call.
Recall 1
Release a connected call. Press Recall again to connect to a waiting call.
Recall 2
Place current call on hold, connect to new call and toggle between calls.
Recall 3
Conference both calls.
Recall 4
Transfer the held call to the current call.
(This transfer can be supervised or blind)
FAQs
My Internet service is not working
If you find your Internet is not working, please double check your cables are properly
connected and confirm the correct lights are on for your Broadband technology. Please
allow the gateway 20 minutes to complete the automatic setup and do not reboot it.
Technology
PWR
SYS
PPP LTE (or) 3G WWAN xDSL
GE4
ADSL/FTTB/FTTN
FIXED WIRELESS/FTTC/FTTP/HFC
Cellular
Solid Light
Pulse
Flashing with use
6
