P. 6
User Guide
1.
Ensure that the doors are all closed and that the gearshift lever is in the
Neutral
position.
2.
With the engine already running, apply the parking brake and release the brake
pedal.
Make sure to release the brake pedal.
3.
Within 20
sec. push
LOCK
,
UNLOCK
or
START/STOP
on the transmitter.
The parking lights will flash 3 times quickly and remain lit.
4.
Remove the key: the engine will go on running.
5.
Exit the vehicle and close the door.
6.
Press the
TRUNK
button until the system is armed (the doors will be locked if remote
door lock is installed).
If the pre-programmed run time expires or if the user shuts down the engine by remote
control, the vehicle will get in Ready Mode.
Caution:
Do not leave children or pets unattended in a car in Idle Mode.
Valet Modes
When your vehicle is in Valet Mode, the remote starter functionalities are disabled. If the
vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine
from being remote started accidentally.
Valet Mode using the Valet Button
(If installed)
To put the system
into
Valet Mode:
1.
Turn the key to the
IGNITION ON (RUN)
position.
2.
Press (for at least 1 second) and release the Valet Button. The LED will come
ON
.
To take the system
out of
Valet Mode:
1.
Turn the key to the
IGNITION ON (RUN)
position.
2.
Press (for at least 1 second) and release the Valet Button. The LED will go
OUT
.
The Valet button can only be used if the vehicle keys are in the
IGNITION ON (RUN)
position.
Ignition Valet
The system can be placed in Valet Mode to disable the remote starting capabilities. If the
vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine
from being accidentally started by remote control.
To
enter
Valet Mode
•
With the key in the Ignition switch, turn the key to the
ON (RUN/IGNITION)
and then
OFF
positions 5 times within 10 seconds.
•
The Parking Light will flash 3 times indicating the Module is now in Valet Mode.
The LED will turn
ON
solid.
To
exit
Valet Mode
•
With the key in the Ignition switch, turn the key to the
ON (RUN/IGNITION)
and then
OFF
positions 5 times within 10 seconds.
•
The Parking Light will flash twice indicating the Module is now out of Valet Mode.
The LED will turn
OFF
.
