User Guide
P.
3
Introduction
This module is a state-of-the-art remote car starter system. With many advanced functions,
this product will satisfy any one of the user’s expectations from high-end commodity systems,
without neglecting the standard features commonly offered by entry-level starters.
Basic Remote Operation
Your remote car starter can operate two independent vehicles equipped with an identical
remote car starter (see
multi-car operation
on page 9).
The functions of the transmitter are as follows:
Pressing the
LOCK
and
UNLOCK
buttons simultaneously will activate the
AUX 2
output.
For certain vehicles:
•
Pressing and holding the
LOCK
button for more than 3 seconds will lock all doors and will
send a constant pulse as long as the
LOCK
button is held down (maximum of 15 seconds).
This constant pulse can be configured to activate certain functionalities such as rolling up
the windows –
Please refer to your installer to see if your vehicle is compatible with
this option.
•
Pressing and holding the
UNLOCK
button for more than 3 seconds will unlock all doors and
will send a constant pulse as long as the
UNLOCK
button is held down (maximum of 15
seconds). This constant pulse can be configured to activate certain functionalities such as
rolling down the windows –
Please refer to your installer to see if your vehicle is
compatible with this option.
Vehicle Presets
Heater and Heated Seat
When leaving the vehicle it is recommended to preset the accessory controls in preparation
for the next remote start. Settings for the blower motor (fan), front and rear, as well as
heated seats (if equipped) should not be left on
HIGH
. It is recommended to leave the settings
on
LOW
or
MEDIUM
instead.
Windshield Wipers, Radio and Headlights
Certain vehicles require the radio and / or windshield wipers and / or headlight circuits to
become energized while running under remote start. When leaving the vehicle you must
ensure that the windshield wipers and headlight switches are
OFF
. Leaving the headlight
