Command Light CL605, Руководство пользователя, Страница: 13 / 46

USER GUIDE
13
Location Requirements
The standard COMMAND LIGHT Models 605,607,611,615 can be mounted on any
location that is 73” x 36”. The surface should be flat or have only a slight crown. For a
recessed installation allow for a minimum of 86” x 48”. Consult with factory before
construction of recessed installation. Verify all dimensions before installation to assure
proper operation of light will not infringe on other installed components. For all other
installations refer to the dimensional drawing included in the beginning pages of this guide
that represents your particular model of light. The drawings reflect the dimensions of the
“working envelope” of a typical light. Make certain sufficient clearances are incorporated in
your installation to allow for variations (vehicle body flex, environmental conditions, future
servicing needs, etc.) If your light is not represented, call the factory prior to beginning any
construction of a recessed installation.
Four mounting bolt holes are required. Eight holes are provided to allow the installer to
avoid obstructions when mounting the light. Additional holes may be drilled in the frame
ends if necessary to clear obstructions.
Access holes for the power cord cabling should be in close proximity to the entrance box on
the light. Installing the cords with a sweeping 90
° or 180 ° bend will provide better results.
The control box holster should be mounted in an area shielded from the weather. Allow a
minimum of 10
" clearance above the control box holster mounting location for easy access
to the controller.