Command Communications privatetime PT1000, Руководство оператора

Страница: 14 / 28

Dialing the stored Numbers
One-touch
1. Pick up handset (or turn SPEAKER on).
2. Press
M1
-
M3
, the number stored in that memory will be
dialed.
Two-touch
Press MEMORY , then press a keypad button corresponding to a
stored speed dial number 0-9 including the and buttons.
Temporary tone dialing (for rotary service users)
If you have pulse service, you can still use special services that require
tone signals, such as bank-by-phone, by following these steps:
1. Set the T P switch located on the rear panel to P .
2. Dial the phone number
3. When the call is answered, press . Any additional numbers
dialed are sent as tone signals.
4. After the call is completed, the unit resets to pulse dialing.
Flash button
1. Press FLASH if you hear a Call Waiting tone while
speaking.
2. The first call is put on hold and you can answer the second
call.
3. Press FLASH again to return to the first call.
3 PT1000
Operator’s Guide