Command Alcon TrackIt RDT-A7.0 Скачать руководство пользователя страница 7

Страница: 7 / 8

RDT-A7.0 Installation Guide

Connect the RDT-A7.0 to the OBC

The RDT-A7.0 and OBC will need to be connected via cable and wifi.

To connect the RDT-A7.0 to the OBC

1. Ensure the 44 D-Sub High Density Connector (HD-44) that is part of the

OBCPIGOCTO is connected to the OBC device.

2. Attach the RDT.PWR cable on one end to the OBCPIGOCTO cable via

the black connector.

3. Connect the other end of the RDT.PWR cable to the back of the RDT-

A7.0.

Connecting RDT-A7.0 to the OBCPIGOCTO cable will allow the RDT-A7.0 to

draw power from the vehicle.

Содержание TrackIt RDT-A7.0

Страница 1: ...RDT A7 0 Version 2 0 Hardware Installation Configuration 03 04 19 ...

Страница 4: ...wer cable Meant for systems without the OBC Component RAM B 138U or RAM B 101U Description RAM mount and mounting dock Required tools equipment Two 0 7 x 14 mm machine screws Wire cutters Phillips screw driver s or power screwdriver Wire connectors Fasteners for the RAM mount ...

Страница 6: ...6 Because all vehicles differ the screws and washers required for securing the mount to the vehicle s dash are not included with the kit and the installer will need to choose screws and washers that best fit the vehicle and mount ...

Страница 7: ...nsure the 44 D Sub High Density Connector HD 44 that is part of the OBCPIGOCTO is connected to the OBC device 2 Attach the RDT PWR cable on one end to the OBCPIGOCTO cable via the black connector 3 Connect the other end of the RDT PWR cable to the back of the RDT A7 0 Connecting RDT A7 0 to the OBCPIGOCTO cable will allow the RDT A7 0 to draw power from the vehicle ...