Command Alcon TrackIt RDT-A7.0 Скачать руководство пользователя страница 3

Страница: 3 / 8

RDT-A7.0 Installation Guide

Hardware Requirements

The following section provides the components needed to install the RDT-A7.0 system. Because the

RDT-A7.0 only connects via wireless network, the OBC317 is a requirement for the installation. See

the instructions for installing the OBC and then continue this installation guide for information about

installing the RDT-A7.0 with the OBC.

RDT-A7.0 system hardware components

Before beginning the installation, ensure one type of the following components are included with the

unit.

Component

RDT-A7.0

Description

Wifi-ready mobile data terminal.

Component

RDT.PWR (Option 1)

Description

RDT power cable

Meant to connect the RDT-A7.0 to the

OBC

Содержание TrackIt RDT-A7.0

Страница 1: ...RDT A7 0 Version 2 0 Hardware Installation Configuration 03 04 19 ...

Страница 4: ...wer cable Meant for systems without the OBC Component RAM B 138U or RAM B 101U Description RAM mount and mounting dock Required tools equipment Two 0 7 x 14 mm machine screws Wire cutters Phillips screw driver s or power screwdriver Wire connectors Fasteners for the RAM mount ...

Страница 6: ...6 Because all vehicles differ the screws and washers required for securing the mount to the vehicle s dash are not included with the kit and the installer will need to choose screws and washers that best fit the vehicle and mount ...

Страница 7: ...nsure the 44 D Sub High Density Connector HD 44 that is part of the OBCPIGOCTO is connected to the OBC device 2 Attach the RDT PWR cable on one end to the OBCPIGOCTO cable via the black connector 3 Connect the other end of the RDT PWR cable to the back of the RDT A7 0 Connecting RDT A7 0 to the OBCPIGOCTO cable will allow the RDT A7 0 to draw power from the vehicle ...