Primary WHITE
Primary WHITE
Position Switch BLACK
PHI Harness
Harness White (PM300 Yellow)
Harness Black (PM300 Green)
Position Switch BLACK
PHI pushpad and housing
PM300 Instructions Rev. 1.0 Page 4
Primary
Solenoid
Secondary
Solenoid
Red 1
Black 1
Black 2
Black 2
Primary Red
Primary Black
Secondary Black
Secondary Black
Corbin/Yale Harness
HarnessWhite (PM300 -UNIVYellow)
Harness Black (PM300-UNIVGreen)
Remove pushbar and separate push pad from device to gain access to the solenoid/circuit board assembly.
Connect Red primary solenoid wire to White harness wire. Next, connect Black primary solenoid wire to Black harness wire. Disregard the
two Secondary Black wires
PM300
PM300
Remove Circuit Board
Corbin/Russwin wire connections instructions:
Precision wire connections instructions:
Cut wires from board and remove circuit board from bar.
Step 1.
Step 1.
Step 1.
Step 2.
Step 3.
Connect harness wire to PM300 Module.
Step 1.
Connect upper White solenoid wire to White harness wire. Next connect lower white solenoid wire to Black harness wire. Disregard the two
Position switch Black wires
Step 2.
Connect harness wire to PM300 Module.
Remove pushbar and separate push pad from device to gain access to the solenoid/circuit board assembly.
