Comm-Tec ProTUNE HD / S, Руководство пользователя

Страница: 2 / 59

2von 59
Disposal
The packaging of your device is composed exclusively of recyclable materials. Please run this again sorted according to the "dual
system". This product may not be disposed with the normal household waste, but should be brought to a collection point for
recycling electrical and electronic equipment.
The - Symbol on the Product, user’s manual or packing refers to disposal.
The materials are as marked recyclable. By recycling, material recycling or other forms of recovery from old devices, you make an
important contribution to protect our environment. Ask your city or local authorities about ways to properly dispose e-waste in
keeping with current environmental
standards and regulations.
Return spent batteries to a designated collection point. Never dispose of batteries along with your normal household waste.
Batteries probably could contain toxic substances. Therefore, always dispose of batteries in accordance with current laws
governing mandatory return schemes for e-waste.
Safety Precaution
•
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage"
and to prevent from a risk of electric shock.
•
WARNING: To reduce the risk of electric shock, don't open the housing. Refer servicing to qualified personnel only.
•
The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance
(servicing).
•
WARNING: Do not use the ProTUNE HD where contact with or immersion in water is a possibility. Do not use near flower
vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
•
WARNING: Do not put the candle or lamp stand on the housing
•
WARNING: The unit should be connected to a power supply only of the type described in the operating instructions or as
marked on the unit. If you are not sure of the type of power supply (for example, 120 or 230 V) to your home, consult your
local dealer or local power company.
•
WARNING: This product installs diodes. Do not open the housing or touch any parts in the inner mechanism. Consult your
local dealer for technical service if the opening is required.
•
Note: To ensure proper use of this product, please read this User manual carefully and retain for further reference.
•
Unit Cleaning : After the unit power is turned off, you can clean the housing, panel and remote control with a soft cloth lightly
moistened with a mild detergent solution.
•
Accessories/Attachments: Never add any attachments and/or equipment without the manufacturer consent; as such
additions may result in the risk of fire, electric shock, or other personal injury.
•
Locating: Slots and openings in the housing are provided for ventilation to protect it from overheating. Do not block these
openings or allow them to be blocked by placing the ProTUNE HD on a bed, sofa, or other similar surface, nor should it be
placed over a radiator or heat register.
•
Power Cord Protection: Place the power cord out of the way, where it will not be walked on. Please take special attentions
to cords at plugs, convenience receptacles, and the point where they exit from the unit.
•
Object and Liquid Entry: Never put objects of any kind into ProTUNE HD through openings, as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill any liquid on the ProTUNE HD.
•
Note: Moisture may be formed inside the unit when it is suddenly moved from a cold environment or an air-condition room to
a warm place, immediately after a heater has been turned on, and in a steamy or very humid room. If the moisture forms
inside the unit, it may not operate properly. To correct this problem, turn on the power and wait about two hours for the
moisture to evaporate.
•
Parts Replacements: When the unit parts need to be replaced, user should make sure the service technician use the
replacement parts specified by the manufacturer or having the same characteristics as the original part. Unauthorized
replacement may put the unit In the risk of fire, electric shock or other hazards.
•
Safety Check After all the maintenances and repairs are done, user is required to request the service technician to conduct
the overall safety check to ensure the machine is in the proper condition.