Metal Stomp Chromatic Tuner
Operation and Function
1. ON / OFF
2. Screen: a. Note Name
b. Tuning Meter and Calibration
3. Input
4. Output
5. 9V DC Input
6. 9V DC Output
7. Battery Compartment
Specification
Tuning Mode
: Chromatic
Tuning Range
:
Tuning Way
: The signal input must be connected
Tuning Tolerance:
0.5
A
0
(27.5Hz) - C8 (4186.00Hz)
±
Thank you for purchasing stomp chromatic tuner
MTU 50
7
1
5
4
2
6
a
b
3
MTU 50
User manual
www.audiomusic.es
Power
Dimension
Weight
353g
Attachment
Manual, Battery
:6F22 battery, or 9V DC
:125mm
×
73.8mm
×
40mm
:
:
How to Use
1
Install a battery, or link a AC-DC 9V connector. Please pay much attention to polarity.
2 Link the input, and the tuner automatically turns on. When the tuner is on, the singal can't get
through the output. When turn off the tuner by pressing the ON / OFF button, the signal will pass
through the output.
3 Play a single note from your instrument, the note name will appear in the tuner screen. The screen
color will change, and the tuning needle will move.
The screen turns green, the center needle appears, both triangles besides the note name appear: in tune.
The screen is white, the left tuning needles appear, the triangle at the left side of the note name appears:
flat note
The screen is white, the right tuning needles apprear, the triangle at the right side of the note name
appears: sharp note.
4 When disconnect the Input, the tuner will turn off automatically.
.
.
.
.