Modular Matrix Switcher 32x32
Comm-Tec Srl 8 www.comm-tec.it
2.1.2. Rear Panel
Figure 2- 2 Rear Panel of Modular Matrix Switcher 16x16
No.
Name
Description
①
INPUTS
Input signal card slots, 4 in total
②
OUTPUTS
Output signal card slots, 4 in total
③
Power
switch
Switch between AC110V and AC230V to access different power
④
TCP/IP
(Optional) Used for TCP/IP control port
⑤
RS232
Serial control port, connect with RS232 port of control device.
⑥
Power
ports
Connect with household alternating current power, including one
redundant power.
Note
: There are only 4 input and 4 output slots for Modular Matrix Switcher 16x16,
which enables only 4 input cards and 4 output cards to be installed on Modular Matrix
Switcher 16x16. The input/output cards can be changed based on your requests and
supports hot plug and play.
2.2.
Changeable Cards
Modular Matrix Switcher 16x16 supports expansion through various changeable input/
output cards of different signals including DVI, HDMI, VGA, twisted pair, SDI etc. Here
is a brief introduction to the changeable cards.
2.2.1. 4I-DV & 4O-DV
DVI signal card. (Please check the specification from 5
.2.1
)
It is fully compatible with HDMI1.3 and HDCP, but not supporting analogy signal.
It is embedded EDID management technology, supporting DDC.
4I-DV
: input card, maximum four input signal. Input signal can pass to output device
through 4O-DV or other kinds of output cards.
