User Manual for Composite/Stereo-Audio Matrix COMM-TEC MTX series
COMM-TEC GMBH
www.comm-tec.de
7 of 12
3. Installation
3.1 Hardware Installation
The MTX matrix switchers are rack-mountable using the holes in the front panel. Take a set of standard rack
screws and secure the unit into the rack. For ideal performance and easy wiring access it is advisable in a 19“
rack leave at least 1ru space above and below. Do not place high heat-producing equipment directly above or
below the enclosure.
.
3.2
Video Connection
Use good quality 75Ohm coax cable for all video connections. Switch off all units while connecting sources and
destinations.
3.3
RCA Connection
Tip (+)
Sleeve ( )
RCA Connector
3.4
BNC Connection
Sleeve ( )
Tip (+)
BNC Connector
3.5 Audio Connection
The MTX CA Matrix Switchers can switch unbalanced stereo audio signals
Connect your Audiosources with the RCA terminals indicated with AUDIO INPUTS, and the AUDIO OUTPUTS
RCA connectors with your destinations (Amplifier, Recorder, Active Speakers....). Don’t mix up the right and left
channel of your stereo audio signals.
Eingänge
Audio Out
Audio In
L
L
R
R
Video Out
Video In
Input
Output
Video
Audio L
Audio R
Input port
(Out put ports)
AV
c
mat r i x swi t her
A v out put equi pment
/
A V
/ input equipments
