Comfy Go Mobility BC-6011, Руководство пользователя и гарантия

Страница: 14 / 24

~
14
~
4. Battery and charger
4.1 Charger requirements
The charger is used for battery charging. During power wheelchair is being charged, do not use
it.
The charger should meet following requirements
4.1.1 Charger technical data
Input voltage
：
AC 220V Output voltage
：
24V/DC Output current
：
2A for 12 AH ,3A
for20 AH,
4.1.2 The battery box’s plug is squared three-pin, liquid inlet protection class is IPX1
4.1.3 The charger should meet requirements of GB 4706.1-2005 and GB 4706.18-2005.
4.2 Use of charger
In order to charge the battery, connect one end of the charger plug with power supply, and
connect the other end with battery box’s plug, as shown in picture 9. Doing as following
instructions to complete charging process
：
First step: Make sure the charger groove is not blocked.
Second step
：
Make sure the power wheelchair is power off.
Third step ： Unplug the plugs that connect the battery box and controller.
Fourth Step: Connect the charger’s output plug to the battery box’s power plug.
Fifth step ： Connect the charger’s main plug to the power supply and the red light will be on , fully
charge needs 8 to 10 hours, do not overcharge more than 24hours.
Sixth step ： Please charge the battery at least once per month when the wheelchair is not being used
to prevent cut short battery life.
picture9