Comfortflame.US.com
900562-00B
14
INSTALLATION
Continued
Figure 17 - Outside Air Kit
Secure to Collars with Metal Tape, Screws or
Straps (Min. of 1/4" x 20" in size)
Air Inlet
Location
Must Allow
For Bushes
or Snow
Vent Hood
Required for Wall
Installation
Air Inlet
Eyebrow
Vented Crawl Space
(Check Local Codes
Before Installing in a
Vented Crawl Space)
Screws
Hood
Figure 18 - Screw and Hood Placement (Model May Vary From
Illustration)
Figure 19 - Installing Fireplace Screen (Model May Vary From
Illustration)
Screw
Rear Hole
Top View of Rod Layout
Rod
Front
Hole
Ring
Screen
Identification
Label Location
OPTIONAL OUTSIDE AIR KIT (MODEL AK4/AK4F)
Installation of outside air kit should be performed during rough fram-
ing of fireplace due to the nature of it's location. Outside combustion
air is accessed through a vented crawl space (AK4F) or through a
sidewall (AK4). See
Figure 17
.
CAUTION: Combustion air inlet ducts shall not
terminate in attic space.
INSTALLING FIREPLACE HOOD AND SCREEN
1. Attach hood to firebox using screws provided
(see
Figure 18
)
.
2. Insert each rod through all rings located at top of screen.
3. Insert first rod into rear hole in left side of firebox. Fasten rod to
rear hole near center of firebox using #10 x 3/8" Phillips screw
provided
(see
Figure 19
)
.
4. Insert other rod into front hole on right side of firebox and fasten
using remaining Phillips screw.
