ASSEMBLY : BENCH
1
Metal Frame with Mirror
2
Metal Bench Top - Single
3
Screws x 4
ASSEMBLY
1. Position Bench top into frame so screw holes meet.
2. Tighten each screw into each hole on both left and
right side, ready for mounting.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
3
2
1
GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
WEIGHT
29.5kg
(65Ilbs)
PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON WALL TYPE. NO RESPONSIBILITY
IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
WALL FIXINGS NOT SUPPLIED. PLEASE REFER
TO MIRROR WEIGHT WHEN INSTALLING TO
DETERMINE BEST PRACTICE MOUNTING.
WALL STUDS AND NOGGINS ARE NOT
REQUIRED WHEN INSTALLING MIRRORS
IMPORTANT
