44
ASSEMBLY AND FUNCTION INSTRUCTION (60-582105)
STEP 5
Turn assembled chair frame upright. Position the center
hole in seat plate (D) over the gas lift (E). Then carefully
lower the chair onto the gas lift.
While seated, lean forward, lifting your body weight from
the seat. Reach underneath the right side of chair and
locate the handle. Lift the handle up slowly with a clockwise
twisting motion to allow the chair to rise to the desired
height. To lower seat height, lift the handle slowly with a
clockwise twisting motion while seated.
TO ADJUST SEAT HEIGHT
Right
Handle
Reach under the front center of the chair seat and grasp the
round black tension knob. To loosen the tilt mechanism,
turn the knob clockwise. This lessens the effort required to
recline the back cushion of the chair. To tighten the tension
knob, rotate counter-clockwise. Rotate the knob until the
desired resistance is reached.
TO ADJUST TILT TENSION
Round tension
knob
While seated, reach underneath the right side of chair and
locate the handle. Slide the handle all the way out towards
the right (away from the seat). When the handle is in this
position, leaning back will cause the chair to tilt backwards.
To lock the chair in the upright (vertical) position, sit in the
chair, and push the handle in to the left (towards center of
seat).
TO OPERATE TILT LOCKOUT
Right handle:
* Pull outward
to allow tilting
* Push inward
to lock out
the tilt
E
Adjustable
lumbar control
TO ADJUST LUMBAR SUPPORT
Turn the lumbar control knob clockwise to increase the
amount of lumbar support. Turn the knob counter-clockwise
to reduce the amount of support.
