4
4
www.comfortzoneproducts.com
LIMITED WARRANTY
This unit is guaranteed to the original retail purchaser
against defects in quality or workmanship for a
period of one year from the date of original purchase.
If this unit fails because of a manufacturing defect
within 30 days of purchase, return the unit, with your
receipt, to the retailer. After 30 days, but within the
warranty period, if the unit was purchased within the
continental United States, return it, freight prepaid,
to World and Main for repair or replacement. If the
unit was purchased outside the continental United
States, return the unit to the place of purchase. This
warranty does not cover damage caused by misuse,
abuse, overheating or alteration. Repairs made by
anyone other than World and Main are not covered in
this warranty. World and Main will not be held liable
for any losses due to neglectful operation. All implied
warranties, including the warranties of merchantability
and of fitness of purpose, if applicable, are hereby
limited in duration to the period of one year from the
date of original retail purchase. Some states do not
allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
Incidental or consequential damages arising from a
breach of either express or implied warranties are
hereby disclaimed and excluded. Some states do
not allow the exclusion of limitation of incidental or
consequential damages, so this limitation or exclusion
may not apply to you. Upon the expiration of this
warranty all such liability will terminate. No other
warranties are expressed or implied.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state. No informal dispute settlement mechanisms
are available. This limited warranty is given in lieu of
all other warranties.
Manufactured for:
World and Main (Cranbury), LLC
324A Half Acre Rd.
Cranbury, NJ 08512 USA
800‑221‑6895
www.comfortzoneproducts.com
Rev. 09/17/21
Note:
To safely store the
fabric cover and bug screen
when not in use, roll up,
either separately or together,
and fasten under the plastic
hook, included (see Fig. 5).
Care and Maintenance
Cleaning:
CAUTION‑Before cleaning the fan be sure to
disconnect power cord from the plug. Clean the grille surface
with a clean damp cloth. Do not use harsh chemical or abrasive
cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN
WATER. Replace front grille before fan use. Allow fan to dry
completely before use. Periodic grille cleaning with a vacuum will
prevent dust build up. The motor is sealed and does not require
any interior maintenance, cleaning or lubrication.
Maintenance:
The internal motor bearings are permanently
lubricated at the factory and do not require any additional
lubrication.
Repair:
DO NOT OPERATE THE FAN WITHOUT THE GRILLE IN
PLACE. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR
BECOME DAMAGED IN ANY WAY
Storage:
Keep original carton for storage of the fan. Coil and tie
the power cord to avoid damage during storage.
Note:
Some models come with a plug where you can replace a
fuse. If your model has this, please read and follow the below
instructions to replace the fuse.
This product employs overload protection (fuse). A blown fuse
indicates an overload or short‑circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per
the user servicing instructions (follow product marking for
proper fuse rating) and check the product. If the replacement
fuse blows, a short‑circuit may be present and the product
should be discarded or returned to an authorized service facility
for examination and/or repair.
Fuse Replacement:
1. Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2. Open fuse cover by sliding open fuse access cover on top of
attachment plug towards blades. See Fig. 2.
3. Remove fuse carefully. Use a small tool to pry the end of the
fuse from holder cavity. Be careful not to break glass window.
4. Replace fuse. WARNING: Risk of fire. Replace fuse only with
identical 2.5 or 5.0 Amp, 125 Volt fuse (3.6mm x 10mm).
Besure fuse is properly seated within its cavity.
5. Close fuse cover by sliding it back to its original closed
position.
Fig 1
Fig 2
Fig 3
Slide Cover to Open
Plastic
Hook
Fig. 5
