3
3
www.comfortzoneproducts.com
USAGE:
Fan Operation:
Always operate the fan in the upright position
following all instructions and recommendations listed in this manual.
Fan Location:
Place the fan in the area of the room that will
provide proper fan cooling. This fan can be placed in a window
to provide additional FRESH air from outside. In this location,
the fan can also be used to push inside air to the outside using
the EXHAUST position.
Fan Connection:
Plug fan directly into 120 volt A.C., 60 Hz wall
outlet. Be sure plug fits tightly in outlet. A loose connection may
cause overheating and damage to the plug or fan.
Note:
To prevent overloading a circuit, do not plug the fan into a
circuit that is servicing other electrical needs.
Turning Fan On/Off:
To start the fan, rotate Control Dial from 0
position to desired fan speed (I or II). Rotate dial to 0 to discontinue
use. Unplug fan when not in use.
Installation for Double Hung Window:
• If space allows, screens can be left in place.
• Legs should not be installed when mounting in window.
• Your fan comes fully assembled and is ready for window
installation.
• This fan has been designed for a double hung window with
minimum openings of 22‑1/2" wide x 11‑1/8" high.
• Prior to installation, be sure the side panels are in the retracted
position.
1. Open window at least 12".
2. Identify the front and back sides of the fan. For Fresh Air
Operation (draw in fresh air from the outside), position the
fan so the front side faces you. See silkscreen indicator
under control dial "This Side ‑ Fresh Air In". For Exhaust Air
Operation (pulls inside air out of the room), position the fan so
the back side faces you. See silkscreen indicator under control
dial "This Side ‑ Exhaust Out".
3. Place one hand under the fan and grasp the recessed handle
around the Control Dial with your other hand. With power cord
aligned in its slot and coming inside the house, position the
bottom (lower edge) of the fan over the sill cap of the window
while still holding the recessed handle. Use your free hand to
lower the window sash down, making firm contact with the
top of the fan (See Fig. 1). Secure window sash in down
position tight against the fan top. Note: It is the customers
responsibility to be sure the fan is secure in the window.
4.
Pull out each side panel until the space on the sides of the fan
are fully blocked, making sure that the power cord is hanging
inside the room. The side panels can be retracted back into
the fan by pushing them inwards.
CAUTION:
Fan will not stop a child from falling out of the
window. Keep children away from open windows.
Fan Functions:
FRESH AIR Operation draws fresh air in from the outside.
EXHAUST AIR Operation pulls inside air out of the room.
Instructions for Floor or Table Use:
Simple assembly is required to use this fan on a table or floor
Locate 4 slots on the base of fan (See Fig. 2). Push fan leg into
slot to lock in place. Repeat this action on the other leg.
Removable Fabric Cover
(Included in select models only)
:
This
fan has a unique fabric cover included that helps keep out hot
air, humidity and bugs when the fan is not in use. Simply attach
loops of cover to the hooks around the fan openings (See Fig.
3). This cover can be used on the inside surface while the fan is
installed in your window for intake or exhaust. Please be sure
to remove cover before you use the fan. Do not run the fan with
cover on, damage can result.
Bug Screen attaches to back of fan
(Included in select models
only)
:
Simply attach loops of cover to the hooks around the fan
openings (See Fig.4).
Note:
There could be a potential loss of airflow when the cover is
in place.
Control Dial
Fig. 2
2
1
4
3
Fig. 1
Side Panel
Top Window Sash
Top Window Fan
Side Panel
Attach
Loops of Cover
to Hooks
Fig. 3
Fig. 4
