Comfort Bilt HP22N, Руководство пользователя

Страница: 28 / 40

A majority of all problems with pellet stoves are related to general maintenance and cleaning. Regularly
cleaning your stove will allow it to function properly and extends the life of most of the stove’s components.
Due to differences in fuel quality, stove cleaning intervals can vary wildly. However, the cleaner the stove is,
the more efficiently it will burn.
Never perform cleaning or maintenance on a hot stove.
Allow unit to cool completely.
Interior components may still be hot, even when stove
surfaces are cool to the touch. A protective glove is
recommended.
Maintenance & Cleaning
28
comfortbilt.net
WARNING!
visit: https://comfortbilt.net/pages/our-videos
or scan the code.
Maintenance & Cleaning Video
Clinkers may remain hot for several minutes
after they are pulled from the burn pot.
Never perform service with power supplied
to the unit.
In order to access many of the areas needed to clean, you must first remove the large vented side panels.
Each side panel is held in place at the top by two 5mm Allen screws that are accessed from inside the hopper.
Along the top edge of the inside of the hopper, on the right and the left sides, you will find the two screws that
hold the side panels.
Loosen and remove these screws, taking care not to drop any hardware into the hopper.
visit: https://comfortbilt.net/pages/our-videos
or scan the code.
Side Panel Access Video
Rear Side Panel Access
You can use strong magnet strips, (such as neodymium) to secure the side panels
without needing the inner 5mm bolts to secure them.
Place a couple magnet bars/strips along the top lip of the side panel
(where it
touches the top of the chassis) .
The panel will hold fast, but is able to be loosened by pulling outward on the top.
Pro Tip
maintenance
Maintenance
Pull the chrome knob in and out a few times. (Keep the front
door shut to contain all of the ash as it falls)
The soot and ash will fall down to the burn pot and ash pan area.
Keeping the heat exchange tubes clean will keep your stove's
heat exchange process efficient.
Heat Exchanger: Daily or as Needed
Clean the heat exchanger with the pre-installed scraper unit at the
top of the stove when the stove is off and cool.
Never touch the scraper rod while the stove is hot or running. Severe burns can occur.
WARNING!