Installation, Operation & Maintenance Manual -
PS-121B / PSH-141A
9
9
PSH-141A
Installation, Operation & Maintenance
INSTALLATION INSTRUCTIONS
Horizontal
window
Window Slider Kit
Minimum: A
Maximum: B
Window Slider Kit
Minimum: A
Maximum: B
Horizontal
window
Fig.6
Fig.7
Location
The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For safe
and secure positioning, place the unit on a smooth,
level floor strong enough to support the unit.
The unit
has casters to aid placement, but it should
only be
rolled on smooth, flat surfaces. Use caution when
rolling on carpet surfaces. Do not attempt to roll the
unit over objects.
The unit must be placed within reach of a properly
rated grounded socket.
Never place any obstacles around the air inlet or
outlet of the unit.
Allow 1ft.-3ft.(30cm to 100cm) of space from the wall
for efficient air-conditioning. (Fig.5)
Window slider kit Installation
Your window slider kit has been designed to fit most
standard "Vertical" and "horizontal"window
applications. However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of windows. Please refer
to Fig. 6 & Fig.7 for minimum and maximum window
openings. Window slider kit can be fixed with a bolt
(see Fig.7a).
Note:
If the window opening is less than the mentioned
minimum length of the window slider kit, cut the one
with a hole in it to fit the window opening.
N
ever cut out the hole in window slider kit.
INSTALLATION INSTRUCTIONS
bolt
Window slider kit
Fig.7a
Fig.5
in.
in.
cm
cm
26-9/16 67.5
48-1/2
123
A
Minimum
B
Maximum
A:1ft.-3ft.(30cm-100cm) B: 1ft.( 30cm)
Heat Controller
B
A
