1. Thread the 6 leveling feet into
the holes around the bottom
of the base. (Figure 1)
2.
to the base with (4) M8
bolts, using the supplied hex
wrench. (Figure 1)
3. Mount the lamp to the terminal
box with M6 screw and nut.
(Figure 2)
4. Connect the terminal box to
the upper column with (4)
M5 bolts. Be sure to feed the
attached power cord into the
upper column. (Figure 3)
5. Connect the center column to
the upper column by screwing
clockwise. Do not over-
tighten.
6. Plug the power cord into the
supplied power cord extender,
and feed the cord through
the lower column and out the
bottom of the base. Connect
the center column to the lower
column byscrewing clockwise.
Do not over- tighten. (Figure 4)
7. Pull gently on the power cord at the bottom of the base
to keep it taut. Fix the cable to the base with the cable
clamp and (2) M4 screws.
(Figure 5)
ASSEMBLING THE UNIT
(Follow diagrams below)
SPECIFICATIONS
MOUNTING AND OPERATING INSTRUCTIONS
Model:
IRPH15SS
Voltage:
120V AC
Emitter (Lamp):
IRRL15120
(Medium wave infrared)
Power :
MAX 1500W
Height:
82 inches (2100mm)
Width:
24 inch base (600mm)
Installation & Operation Manual
Infrared Electric Patio Heater
4
Congratulations on your purchase of the Comfort-Aire
®
Electric Portable Infrared Patio Heater. This heater utilizes
medium-wave technology that heats people and objects,
not the air, and is unaffected by wind. For best results
and your safety, follow the instructions carefully. DO NOT
modify this product in any way as the manufacturer will not
accept liability for improper use.
AITONS EQUIPMENT
