Owner’s Manual -
PTTC/PTTE/PTTH-09/12B-1
18
TO OPERATE ON FAN ONLY:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Note: Use this function only when cooling is not desired, such as for room air circulation.
You can choose any fan speed you prefer, EXCEPT AUTO FAN. During this function, the
display will show the actual current temperature, not the set temperature as in the cooling
mode.
FIRST DO THIS:
PRESS TIMER BUTTON
PRESS TEMP/TIMER
BUTTON
THE TIME CHOSEN:
TIMER-DELA
START/ST
A
Note 1: For Delay Stop, the unit must be in the ON position.
Note 2: For Delay Start, the unit must be in the OFF position.
To adjust timer setting, tap or hold the UP arrow (^) or DOWN arrow (v) to change the delay
time by 0.5 hour increments up to 10 hours, then by 1 hour increments up to 24 hours. The
control will count down the timer remaining until start (8, 7.5, 7, etc.). After set Timer, the
unit will enter into Timer mode for 5 seconds, then Timer light on, Set light off. In Timer
mode: Unit keeps previously set temperature and fan speed; Temperature display set
temperature, no display if power turn off; Press Timer once, LED display remaining time of
set time, LED returns to set temperature in 5 seconds. When in Fan Only mode, LED only
displays room temperature, not display set temperature. Turning the unit "ON" or "OFF" at
any time will cancel the Delay Start/Stop function. The delay Start/Stop feature will work
until the unit either starts or stops. Once this has happened then the above steps have to
be repeated again.
:
(continued)
AIR CONDITIONER FEATURES
Set
Off
Filter
Reset
On
Timer
Temp/Timer
Temp/Timer
Mode
Speed
Fan
Cool
Heat
Fan Only
Med
High
Low
Auto
Set
Off
Filter
Reset
On
Timer
Temp/Timer
Temp/Timer
Mode
Speed
Fan
Cool
Heat
Fan Only
Med
High
Low
Auto
Set
Off
Filter
Reset
On
Timer
Temp/Timer
Temp/Timer
Mode
Speed
Fan
Cool
Heat
Fan Only
Med
High
Low
Auto
Set
Off
Filter
Reset
On
Timer
Temp/Timer
Temp/Timer
Mode
Speed
Fan
Cool
Heat
Fan Only
Med
High
Low
Auto
-15-
