background image

Owner’s Manual  -  

Room Air Conditioner with R-410A BG-P/BG-M/BGE-M Series

3

Owner’s Manual

Room Air Conditioner with R-410A

 

Heat Controller

3

When the air filter is to be 

removed, do not touch the metal 

parts of the unit.

M

ay cause an injury.

Do not clean unit when power is on 

as it may

 cause fire, electric 

shock,

 or 

injury.

Operation 

with 

windows 

open 

may cause wetting of indoor and 

soaking of household furniture.

When the unit is to be cleaned, 

switch off, 

and unplug

.

Use caution when unpacking and 

installing. Sharp edges could cause injury.

Do not clean the air conditioner 

with water.

Water may enter the unit and 

degrade the insulation. It may 

cause an electric shock.

This could injure the pet or plant.

M

ay cause electric shock and 

damage.

Do not put a pet or house plant 

where it will be exposed to direct 

air flow.

Ventilate the room well when

used together with a stove, etc.

An oxygen shortage may occur.

Do not use this air conditioner to 

preserve precision devices, food,

 

pets, plants

 or

 art objects.

 

It may 

cause deterioration of quality, etc. 

M

ay cause failure of product or

fire.

Do not use for 

other than 

human comfort

.

If water enters the unit, turn the unit off at the power 

outlet and switch off the circuit breaker. Isolate 

supply by taking the power-plug out and contact a 

qualified service technician.

!

!

!

!

It may cause

 appliance

 failure 

o

r accident.

Finish

 may be 

damaged.

If bracket is damaged, there is

 

concern of damage

 or injury

 due 

to falling of unit.

There is danger of fire or electric 

shock.

Operation without filters may

 

cause 

failure.

It contains contaminants and 

could make you sick.

Stop operation and close 

window

s

 in storm or hurricane.

!

Do not use strong detergent

s,

  

wax or thinner

;

 use a soft cloth

 

only

.

Ensure that the 

outdoor support 

bracket 

is not damaged due to prolonged 

exposure.

Hold the plug by the head of the 

power plug when taking it out.

!

Disconnect power

 when not 

using the

 

unit for a long time.

!

!

!

Clean filter once every

 

wo weeks.

!

Do not place heavy object

s

 on the 

power

 

cord and ensure that the cord is 

not compressed.

Do not drink water drained 

from air conditioner.

   This appliance is not intended for use by persons 

   (including children) with reduced physical ,sensory 

   or mental capabilities or lack of experience and 

   knowledge, 

unless t

 hey h

 ave

 

b een

 

gi ven

 

supervision

   or instruction concerning use of the appliance by 

   a person responsible for their safety. 

   Children should be supervised to ensure that they 

   do not play with the appliance. 

   If the supply cord is damaged, it must be replaced 

   by the manufacturer, its service agent or similarly 

   qualified persons in order to avoid a hazard.

CAUTION

2

CAUTION

Do not place obstacles around 

air-inlets or inside of air-outlet.

Th

is 

appliance sh

ould

 be installed in 

accordance

 

with national wiring regulations.

Do not operate your air conditioner in a wet

 

room

 

 

such as a bathroom or laundry room.

The appliance with electric heater shall have at

 

least 

3 ft.

 

space

 

to co 

mbustible

 

materials.

 

    

Contact

 an

 authori

z

ed service technician for    

repair or maintenance of this unit.

Contact 

an

 authori

z

ed installer for installation    

of this unit.

IMPORTANT SAFETY INSTRUCTIONS

Содержание BG-101P

























Отзывы: