Page 12
CARE AND CLEANING
WARNING
Never hold motor unit portion of hand blender under running water.
Simply wipe clean with a damp cloth.
Cleaning Whisk Attachment
1. To clean your whisk attachment,
simply release the attachment
from the motor body housing.
2. Once the whisk is removed, detach
the metal whisk from the gearbox
by pulling the pieces apart. To
clean the gearbox, simply wipe
with a damp cloth.
3. To clean the metal whisk, wash
with warm, soapy water or put in
the top shelf of the dishwasher.
Cleaning Motor Body and Blending Shaft
1. Unplug before cleaning the
motor body and blending shaft
thoroughly after using.
2. Remove the blending shaft from
the motor body. Clean the motor
body only with a sponge or damp
cloth. Do not use abrasive cleaners
that could scratch the surface.
3. To clean the blending shaft, wash
by hand in hot water, using mild
detergent.
4. Be mindful of the fixed, razor-
sharp edges.
5. Do not put the motor body or
blending shaft in the dishwasher.
NOTICE
Any service, other than cleaning
and normal user maintenance,
should be performed by an
authorized Service Representative.
4. Do not submerge the gearbox in
water or any other liquids.
Chopper lid, Whisk holder,
Blending shaft inner, Main Unit
