Comfee BM2095 series, Инструкция по эксплуатации

Страница: 13 / 17

INSTRUCTIONS FOR USE
In case of abnormalities such as abnormal noises, smell, smoke, etc., you should
immediately cut off power and stop use.
If the product cannot work, please check if the power supply is connected, if the
switch is put to the ON position and if fittings are installed in place.
If the product still cannot work after checks mentioned above, please consult the
designated repair centre for maintenance.
ABNORMALITY ANALYSIS AND HANDING
Abnormality Handling
1.
2.
3.
INSTRUCTIONS FOR USE
Precut large ingredients into chunks that fit in the feeding tube.
12
Switch off and unplug the appliance.
Detach the mincer body assembly.
Clear the blockage.
Reassemble the mincer body.
Connect the power plug to the power supply and reselect the desired speed.
Meat mincer
2kg
3 min 7
Speed
Time
(Max)
Food
Kg
(Max)
1.
The meat mincer is intended for mincing raw or cooked meat.
When the meat gets stuck in the mincer body, follow the steps below to reset:
2.
3.
4.
5.
This appliance is equipped with motor themal protector. If the appliance overheats, it
switches off automatically. Unplug the appliance and let it cool down until room
temperature then put the mains plug back into the power outlet and switch on the
appliance again. Please contact your dealer or an authorized service center if it is
activated too often
.
Safety system
Note