COMEX COVER Basic 1K, Быстрый старт

Страница: 7 / 8

7
Error code
Error Code Icon Error Code Icon
BUS start error
01 X
Short circuit on the inverter output
14
High BUS voltage 02 X High battery voltage 27
BUS low voltage
03 X
Low battery voltage
28
Inverter start error
11 X
High temperature
41 X
Inverter voltage high
12
X Overload
43
Inverter voltage is low
13 X
Charger damaged
45 X
UPS warnings and audible alarms
Warning Icon Alarm
Low battery voltage Beep every 2 seconds
Overload Beeps every second
Batteries not connected Beeps every 1 second
Overload Beep every 2 seconds
Wiring / connection error Beep every 2 seconds
EPO input active Beep every 2 seconds
Overheat Beep every 2 seconds
Charger damaged Beep every 2 seconds
Battery failure Beep every 2 seconds. (UPS off)
Bypass out of tolerance Beep every 2 seconds
Bypass frequency unstable Beep every 2 seconds
Error EEPROM Beep every 2 seconds
Fan error Beep every 2 seconds
Battery replacement necessary Beep every 2 seconds
UPS support
Turn on the UPS
To turn on the UPS, press and hold the ON / Mute button on the UPS display for 2 seconds.
Warning! In order to obtain the maximum duration of autonomy, the batteries should be charged at
least 10 hours after the first use. The maximum capacity of the battery is obtained after two
complete cycles: discharge / charge.
Turn off the UPS
To turn off the UPS, press the OFF / ENTER button on the UPS display for 2 seconds. Depending on the
setting of parameter 6 - Bypass availability, the UPS will disconnect the output or switch to Electronic
Bypass mode.
To completely shut down the UPS, disconnect the power cord.