- 5 -
SP015C
if you want to arrange both devices side
by side, screw the holder to the left side
of the intended transducer position.
Depending on the type of material on
which the entire assembly will be
mounted, use four suitable 4 mm
diameter screws.
if you want to place both devices freely
in the space, screw them together with
the rear walls over a suitable application
holder (not included) using M4 screws
of suitable length
for installation in the COMETEO F8000
radiation shield, screw the two devices
together with the rear walls over the
mounting bracket that is part of the
shield. See instructions for using the
shield. Use the M4 screws from the
SP015C holder package.
BATTERY REPLACEMENT
for models SP015 and SP015M: If it is necessary
to replace the batteries in the Batteries holder
directly at the installation site, first unscrew the
transducer from the holder posts (2 M4 screws)
and move it to the right of the Batteries holder.
Temporarily attach the transducer with only one
screw to the right post of the Batteries holder as
shown. Do not let the transducer hang by the
power cord.
for all models: Remove the four screws at the
corners of case the Batteries holder and remove
the cover. Replace the batteries with new ones
and reassemble all the assembly in reverse.
Содержание SP015M
Страница 7: ...7 SP015M SP015C...
