- 3 -
PUTTING DEVICE INTO OPERATION
1)
Mounting the connection adapter on the transducer
unscrew the four screws at the corners of the
transducer case and remove the cover
if you have a new transducer, install it according to the
transducer manual (keep it working from the supplied
battery). After the adapter is mounted, the
Configuration button inside the device will not be
accessible - therefore, before continuing, make sure
that the device is turned on and that you do not
require accelerated transducer parameter settings.
remove the battery by pulling on its handle from the
ready transducer
insert one SP015 connection adapter contact into the
Wx8xx transducer battery contact field. Then insert
the second contact into the other the transducer
battery contact field and close the cover. The contacts
of the two devices must fit exactly together.
verify that the connection adapter is flush with the
transducer housing circuit. If not, remove the adapter
and repeat the assembly procedure. Under no
circumstances should you attempt to force the adapter
and transducer into the correct position.
if the adapter is in the correct position, screw it with
the original screws
keep the original cover and battery for case the
adapter is will removed
Содержание SP015M
Страница 7: ...7 SP015M SP015C...
