3
ASSEMBLY INSTRUCTIONS
WARNING: IN ORDER TO AVOID OVERHEATING,
DO NOT COVER THE HEATER.
PART FIGURE
[Installation of the caster assembly]
1.Place the heater body inversely with the
bottom upward.
2.Connect and tighten two wheel carrier
plates to the body with butterfly nuts as
shown in the figure.
3.Place the heater upward after it is
installed securely with the wheels touching
the ground.
7 fins heater caster assembling
9\11\13 fins heater caster assembling
Cord wrap
Caster assembly
Radiating unit
Air Outlet
Power Indicator Light
Power Switch Knob
Termostat Knob