Comet Spa CRS 66 BT, Руководство пользователя

Страница: 38 / 208

38
 The flow adjustment lever is closed or almost closed.

Adjust/increase the detergent solution outlet flow as
required.

The detergent solution filter is clogged.
 Clean the filter.

The detergent feed conduit is clogged in some point.
 Clean out the conduit by removing the dirt.  The flow
opening solenoid valve is burned.
 Replace it.
9.2.5 NO SUCTION

The suction hose is not connected to the squeegee.
 Connect it correctly.

The suction hose, the squeegee conduit or the
inspection compartment is clogged.
Clean out and remove any obstructions from the conduits.
Alarm #id Meaning Solution
AL_1: Function Brushes
Ammeter
Amperometric Protec-
tion Brushes motor
Check usage mode of the brushes function.
Detected elevated work current by the brushes
motor.
AL_2: Function Vacuum
Ammeter
Amperometric Protec-
tion suction motor
Check vacuum motor absorption. Detected eleva-
ted work current by the suction motor.
AL_3: Function Power-
stage Fail
Power section dama-
ged
Power section of brush or vacuum motor dama-
ged; replace the card.
AL_4: Function Over-
current
Overcurrent on brush
or vacuum motor ou-
tputs
Short circuit detected on the output of brushes or
vacuum motor: check connections and engines
status.
AL_5: Function Over-
temperature
Thermal protection on
brush / vacuum motor
section
Overheating on brushes and vacuum motor
power section: check absorptions.
AL_13: Traction Pedal
failure
Pedal connections Check connections and pedal potentiometer sta-
tus.
AL_14: Traction Release
Pedal
Pedal pushed when
switching on machine
Detected traction microswitch closed when
switching on: release the pedal.
AL_15: Traction Over-
temperature
Thermal protection on
tracion motor section
Overheating on traction motor power section:
check absorptions.
AL_16: Traction Power-
stage Fail
Traction power section
damaged
Traction power section damaged: replace the
card.
AL_17: Traction Over-
current
Overcurrent on trac-
tion output
Short circuit detected traction motor output:
Check connections and motor conditions.
AL_18: Traction Tract.
Ammeter
Amperometric protec-
tion traction motor
Check usage mode of the traction function. High
working current has been detected by the trac-
tion motor.
AL_20: General EEprom
Fail
Error reading internal
memory
Replace the card
AL_21: General Key-off
failure
Incorrect key sequence. Detected rebound on the key signal: check con-
nections and key contact conditions.
AL_22: General Main
rele fail
General relay damaged The general relay on the board is damaged; re-
place the card.
AL_23: General Over-
voltage
Overcurrent Overvoltage detected on function board. Check
battery connections.
AL_24: Traction Batt
connection
Battery not connected
to the function board
Check usage mode of the traction function. High
working current has been detected by the trac-
tion motor.
AL_25: General Keybo-
ard fail
Lack of communication
dashboard-board
Check connections between the function board
and dashboard.