![Comet Labs IPTEL-H Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/comet-labs/iptel-h/iptel-h_user-manual_2640730008.webp)
6.
Installations & IP Configurations
1.
Connect IPTEL RJ45 LAN port to Router using the Category 5 LAN cable.
2.
Connect IPTEL RJ45 PC port to Notebook PC using a Category 5 LAN cable.
3.
Connect IPTEL RJ11 PHONE port to a Plain Old Telephone Set (POTS).
4.
Connect the Power Adaptor (5VDC) to the POWER outlet.
5.
The POWER and PHONE LED indicators will start flashing for about 10 seconds and
OFF for a while, then flashing three times again. After the POWER LED is lit
constantly, the IPTEL will be ready for configuration and VoIP calls. If the PHONE
LED keep flashing, is idle, it indicates that IPTEL has successfully registered in the
Gatekeeper (Refer to Section 7 & 8 for Gatekeeper Mode).
6.
Pick up the phone, the PHONE LED will be lit and you should hear a dial tone.
7.
Prepare for the IPTEL an IP address, a Subnet mask, and a Router IP address before
making a VoIP call. These three can be available from your Internet Service
Provider. The defaults of IP Address, Subnet mask, and Router IP Address for IPTEL
are 192.168.1.150, 255.255.255.0, and 192.168.1.254.
8.
Configurations Command modes can be entered from either the telephone or PC
Telnet session and can be stored and remains in the flash memory even when the
power is off.
6.1 IP Configurations From Telephone
1)
Pick up the phone, the PHONE will be lit and you should hear a dial tone.
2)
Enter the IPTEL an IP Address, a Subnet mask, and a Router IP address as the
following.
Press
#11 + IP Address
Example: Press #
11061020102004
if the IPTEL IP Address is
61.20.102.4
Press
#12 + Subnet mask
Example: Press
#12255255255000
if the Subnet mask is
255.255.255.0
Press
#13 + Router IP Address
Example: Press
#13061020102254
if the Router IP address is
61.20.102.254
Note that you must press 3 digits for each byte of the IP address.
3)
After entering each item, you will hear the dial tone for confirmation. If not, you
will hear a busy tone indicating an invalid configuration. The defaults of IP Address,
Subnet mask, and Router IP Address for IPTEL are 192.168.1.150, 255.255.255.0, and
192.168.1.254, respectively.
3