1st edition. Jan 2021. Printed in JAPAN.
Copyright (C) 2021 COMET CO.,LTD. All Rights Reserved.
【
Inspection and care
】
Check the mounting screws and brackets regularly for looseness, and retighten any loose parts.
Be sure to replace parts that have become insufficient or deformed due to changes over time.
■
Specifications or appearance is subject to change without notice.
COMET CO.,LTD.
4-18-2, Tsuji, Minami-ku, Saitama-shi, Saitama-Pref, 336-0026, JAPAN
TEL : 81-48-839-3131 / FAX : 81-48-839-3136
URL : http://www.comet-ant.co.jp/english
Hole for SMA-J bulkhead
Hole for BNC-J bulkhead
●For connector holes other than SO-239
Holes are provided to accommodate SMA-J and BNC-J
bulkhead connectors.
Notice: Please note that some sizes of BNC-J bulkhead
connectors are not compatible with some manufacturers.
!
● Tighten the screws and nuts securely during installation to prevent a fall accident.
● Install in a place free from vibration and shaking so that the screws do not loosen.
● Pay attention to the weight balance when installing antennas.
Cautions
Assembly image : bracket only
Adapter cable install image : Default position [ 0 degree ]
Adapter cable install image : Inclined position [ Max. 30 degree ]
Hex. Nut
Tooth washer
Gasket
FT-817ND,FT-818ND
Install Image
