2
Table of contents
Door entry monitor description ...................................................... 3
(disabled by default from firmware
version 3.0.1 (3.2.0 for 6701W/8) ................................................ 4
Technical specifications ................................................................. 5
Removing/Fitting the Terminal ................................................................7
Connections ..................................................................................... 7
Main and secondary door entry monitors .............................................8
Button configuration ....................................................................... 9
Advanced configuration ........................................................................10
Introduction ...............................................................................10
intercom call: button programming .............................10
Intercom call to selective address: button programming ..........10
Selective intercom address .......................................................11
Assigning selective address ......................................................11
Deleting the selective address of the door entry monitor..........11
Generic actuator, coded actuator .....................................................11
: button programming ....................................11
: button programming......................................12
Other functions: button programming ..............................................12
Programming range ..........................................................................12
Changing the ringtone ......................................................................13
Programming reset ...........................................................................13
Addressing table ............................................................................ 14
System performance and layouts ................................................ 14
Warning
Intended use
This Comelit product has been designed and manufactured for use in the creation of audio and video communication systems in residential,
commercial, industrial and public buildings.
Installation
All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the
indications provided in the Manuals / Instruction sheets supplied with those products.
Wires
Disconnect the power supply before carrying out any operations on the wiring.
Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
We advise against running the system wires through the same duct as power cables (230V or higher).
Safe usage
To ensure Comelit products are used safely:
• carefully observe the indications provided in the Manuals / Instruction sheets,
• make sure the system created using Comelit products has not been tampered with / damaged.
Service
Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided
in the Manuals / Instruction sheets.
Any repairs must be carried out:
• for the products themselves, exclusively by
Comelit Group S.p.A.
,
• for the systems, by qualified technical personnel.
Disclaimer
Comelit Group S.p.A.
does not assume any responsibility for
• any usage other than the intended use
• failure to observe the indications and warnings contained in this manual.
Comelit Group S.p.A.
reserves the right to change the information provided in this manual at any time and without prior notice.
