Comelit iPower kit, Дополнительное техническое руководство

Страница: 4 / 16

EN
4
2
SPECIAL SETTINGS MENU
Set tone repetition
Intercom Directory
Set automatic reply
Video memory records always
Configure volumes
Set call times
Configure volumes
Buttons tone
1
INSTALLER MENU
Special Settings
1. Enter the Installer menu (See point 19).
2. Select the Special Settings menu using the , buttons and
press the button to enter.
3. Select the Configure volumes menu using the , buttons and
press the button to enter.
4. Change the value using buttons , .
The key tone volume can be set to a value between 1 (minimum) and
9 (maximum). Set the value to 0 to disable the key tone.
5. Press the button to exit and save the changes.
Key volume setup (RI 14 for internal unit
6201W - 6201B)
TABLE OF CONTENTS
1. “Always record” video memory activation ((RI 14 for internal unit 6201W - 6201B) .........................................................................................4
2. Key volume setup (RI 14 for internal unit 6201W - 6201B) ..............................................................................................................................4
3. Network connection quality check (RI 14 for internal unit 6201W - 6201B) .....................................................................................................5
1
SPECIAL SETTINGS MENU
Set tone repetition
Intercom Directory
Set automatic reply
Video memory records always
Configure volumes
Set call times
INSTALLER MENU
Special Settings
VIDEO MESSAGE RECORDING
Video memory records always
If this option is enabled after the video memory has been activated,
recording will take place for all calls received, instead of unanswered
calls only.
1. Enter the Installer menu (See point 19).
2. Select the Special Settings menu using the , buttons and
press the button to enter.
3. Select the Video memory records always menu using the ,
buttons and press the button to enter.
“Always record” video memory activation
(RI 14 for internal unit 6201W - 6201B)
5. Press the button to exit and save the changes.
4. Press to activate the function.