37
EN
5.5 SELF-IGNITION FUNCTION
5.2 PAGING CALL
5.2.1 How to initiate a paging call
f
Press to initiate the all-page chime
»
After the chime sounds, a 30 seconds message can be
broadcast to all monitors on the system (maximum 4
monitors).
5.2.2 How to answer a paging call
f
Press to answer the paging call
»
a (300 seconds) point to point conversation between the two
monitor is estabilished.
»
the paging call will be terminated for the other devices.
√
Self-ignition is possible only when the system is in standby
f
Press the self-ignition button (
by default) to display on
the monitor the video from the external unit.
f
Press again to cycle through several cameras.
If a call is underway with an external unit it is NOT possible to
cycle between the external units
f
Long press on key to enable / disable the function.
1
2
cycle
MAIN
UNIT
UNIT 1
UNIT 2
UNIT 3
MAIN EXTERNAL
UNIT
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
5.3 ACTIVATION HANDS-FREE MODE
On receipt of a call the audio will be activated automatically.
f
Press for 10 sec to activate/deactivate Hands-Free mode.
»
A confirmation tone will sound.
»
The LED on indicates that the Hands-Free mode is active.
10 Sec
5.4 LOCK RELEASE FUNCTION
√
During “call in progress” or during Self-ignition.
f
Press
to release the lock.
» the LED will illuminate on the external unit.
