1.
ON
DIP
2.
3.
4.
6.
9.
10.
11.
12.
8.
7.
5.
B A
PR
1. 2.
3.
4
1.
Programming DIP-switch for
button module indexing
and
Device reset
2.
Power supply indicator LED
3. PR
switch for input/output programming
A
in programming mode
B
normal operation
4.
Connector for magnetic induction audio amplification
module connection
5.
Ethernet port activity indicator LED
6.
Indicator LED: call sent
7.
Speaker.
8.
Microphone.
9.
Indicator LED: system busy
10.
Indicator LED: sound activated
11.
Colour camera.
12.
Indicator LED: lock-release activated
1.
Connector for 8-core wire for button module connection
2. JP1
manages the RC network for door lock filter on the relay contacts (see
“Variant for using the external unit relay /
Variant for using a safety lock”
)
3.
Terminal block for connection:
SE+
connection for electric door lock
COM
relay common contact
NC
relay normally closed contact
NO
relay normally open contact
GND SE-
RTE input and SE door lock reference negative
RTE
local lock-release input
V-
V+
+33V or PoE power supply
TX- TX+
Ethernet transmission line terminals
RX- RX+
Ethernet receiving line terminals