Comelit 20003150 Скачать руководство пользователя | Manualshive

Страница: 2 / 54

background image

2

• This Comelit product has been designed and manufactured for use in the creation of security and automation systems in

residential, commercial, industrial and public buildings.

• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful

observation of the indications provided in the manuals supplied with those products.

•  Disconnect the power supply before carrying out any operations on the wiring.
•  Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
•  We advise against running the system wires through the same duct as power cables (230V or higher).
•  To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets; make

sure the system created using Comelit products has not been damaged.

• Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with

the indications provided in the manuals / instruction sheets. Any repairs must be carried out: for the products themselves,

exclusively by Comelit Group S.p.A.; for the systems, by qualified technical personnel.

• Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or for the failure to observe the indications

and warnings contained in this manual. Comelit Group S.p.A. reserves the right to change the information provided in this

manual at any time and without prior notice.

Warning

«
1
2
3
4
...
»

Содержание 20003150























































Отзывы:

Нет отзывов

Похожие инструкции для 20003150

Бренд: Planet Страницы: 4

Бренд: Hama Страницы: 10

Бренд: X10 Страницы: 1

Бренд: ZLINK Страницы: 11

Maestro IR MIR-600

Бренд: Lutron Electronics Страницы: 2

Бренд: Xiaomi Страницы: 5

Бренд: Smartwares Страницы: 2

Бренд: Smartwares Страницы: 2

Seasons Cafe Lights

Бренд: enbrighten Страницы: 2

Бренд: MiNGARDi Страницы: 8

Бренд: Gocontrol Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды