Parameter Programming
6
Some parameters
are accessible only
when the respective
functionality is installed.
(see
'
Specifications
'
).
- Changing
Point Position
value
reflects on the real value
of all parameters
with ISU!
E.g.: changing
Point Position
value
from (0) to (0.0)
would change
a set-point value
of 100 to 10.0!!!
Device parameters
TI08 is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
Setting numerical parameter value
♦
Enter parameter value adjustment mode
(see '
Program Levels
').
♦
The whole part of the value together with
the left zeroes appears on the display,
and the rightmost digit blinks.
♦
To select another digit, press
.
♦
The 3 rightmost digits can accept values
from
0
to
9
, and the leftmost digit
can also accept the values
-
and
`
.
♦
To increase or decrease the blinking digit
value, use respectively
or
.
♦
Confirm the adjusted value by pressing
simultaneously
+
or
+
.
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
Setting symbolic parameter value
♦
Enter parameter value adjustment mode
(see '
Program Levels
').
♦
Read the blinking parameter value.
♦
To change the value, use
or
,
and to confirm, press
+
or
+
.
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
