Come.up Winch DV-6000L, Инструкция по эксплуатации

Страница: 8 / 12

Lubrication
All moving parts in the winch are permanently lubricated at the time of assembly. Under
normal conditions factory lubrication will suffice. If re-lubrication of gear box is
necessary after repair or disassembly use Shell EP2 or equivalent grease with 0.15 litre.
Freespool knob lubricates regularly with light oil. It is not allowed to have brake ass’y
lubricated.
Maintenance Schedule
Ensure that a responsible person carries out all inspections as per schedule.
Inspections are dived into Daily, Monthly and 3 Monthly.
Classification of check
Periodical
Daily
One
month
Three
month
Item Checking method Checking reference
Installation Mounting bolts & alignment. Bolt tension & wear. Existence of abnormalities
Working Manual Reasonable actuation
Remote
control
Wearing in contact points Visual. Free of wear or damage.
Broken strands Visual, measuring Less than 10%
Decrease in rope diameter Visual, measuring
7% of nominal diameter
max
Deforming or corrosion Visual Existence of abnormalities
Wire rope
Fastening condition of end Visual Existence of abnormalities
Freespool Wear in spring Visual evidence of wear Free of wear or damage.
Motor Staining, damage Visual evidence of wear Existence of abnormalities
Wearing of brake disc Visual evidence of wear Free of wear or damage.
Brake
Performance Visual Reasonable actuation
Gear Train Damage, wearing Visual evidence of wear Free of wear or damage.