Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740
for all your Comdial needs.
Page
16
of
27
Setting a Do Not Disturb Condition (when programmed)
Prevent calls from ringing at your station and make your station appear busy to
intercom calls. To use:
1. Press OPTIONS
2. Press NEXT twice
3. Press DND
4. Press ON
5. Press SPKR to end.
To disable, repeat steps 1-5 above, pressing OFF instead of ON in step four.
Override Toll Restriction
Dial a programmed four-digit TRO code at another station to replace that station’s
toll restrictions, prime line or idle line preference with those of your home station
provided you place a call within 15 seconds. After completing one call, you have 15
seconds to make another call without re-entering the TRO code.
To Use TRO at a Station:
1. Press ITCM
2. Dial “**6”
3. Dial your station’s extension number
4. Dial your TRO code number
5. Within 15 seconds, dial the outgoing line number
6. Hang up or press SPKR to end.
To Clear the TRO Code:
1. Press ITCM
2. Dial “**6”
3. Press SPKR.
Using the Optional Tracker Paging System
Send and receive messages on tracker pages assigned to extensions. The tracker
system will park calls for pickup by the paged party. If your station includes a
tracker pager, it must be enabled before use. Disable it when you do not wish to
receive paged messages and at the end of the day.
To enable
, press ITCM and dial “*06”.
To disable
, press ITCM and dial “#06”.
To send a call back message to another station user’s Tracker Pager
, press
ITCM, dial “#01”, dial the station extension number and hang up to end.
To park a call
and have the Pager-Tracker alert someone to retrieve the call:
1. Answer the call and press T/C
2. Dial extension
3. Press TRACK (or dial #01)
4. Your display shows park orbit (91-99) and then returns to idle.
5. Hang up handset or press SPKR to end.
