System Programming
SYSTEM CLOCK INFORMATION
THE CLOCK
1 .
Press
then dial
#.
2 .
Dial clock date with keypad keys.
l
Values less than 10 must be dialed as
ox.
l
Hours must be expressed in 24-hour for-
mat.
.
Enter: YEAR MONTH DAY HOUR
MINUTE
Example: 8808061530 (August
PM)
3 . If SMDR printer is installed and operating, clock
date will be printed as illustrated in following typi-
cal example:
16:00
4 . Reset minutes setting, if necessary, as follows:
l
Repeat step
l
Dial new digits, and press
l
A new clock date printing will occur.
CHECKING THE TIME SETTING
A printing of the current clock date can be obtained
from station 10 whenever needed as follows:
l
Press
and dial # #.
A clock date printing will automatically occur once
each 24-hour period. This daily, automatic printing
will formatted as follows:
(current date and
hours)
P O W E R
The system clock will continue to run for at least 30
minutes after AC power has been removed form the
system. If power is restored within the
backup period, the
sequence will
occur:
OFF
TIME
(time of power outage)
HR:MN (time of
return)
If power is not restored within the backup period, the
following printing sequence will occur when the
power is restored.
CLOCK
VALID
(default clock date)
The clock will begin running from the default date. It
must be reset to the current date per the instructions
above.
3-l 1
