Comdial DigiTech 7700S Series Скачать руководство пользователя страница 66

Страница: 66 / 144

•

There are eight speaker loudness levels. Set these levels for
the current call as follows:

1. While on a call and in speakerphone mode, press VOLUME

UP or VOLUME DOWN once for each change in loudness
that you desire.

•

There are at least eight handset loudness levels that you can
set for the current call as follows:

1. While on a call and in handset mode, press VOLUME UP or

VOLUME DOWN once for each change in loudness that you
desire.

NOTE: If your installer has programmed the high handset volume

feature for your station, you will have 13 handset volume levels.

•

There are eight headset loudness levels that you can set for
the current call as follows:

1. While on a call and in headset mode, press VOLUME UP or

VOLUME DOWN once for each change in loudness that you
desire.

NOTE: If your installer has programmed the high handset volume for

your station, you will have 13 headset volume levels as well as
13 handset volume levels.

•

There are eight group listening loudness levels. Set the level
for the current call as follows:

1. While on a call and in the group listening mode, press

VOLUME UP or VOLUME DOWN once for each change in
loudness that you desire.

•

There are eight background music loudness levels. To set the
level,

1. While background music is on at your station, press

VOLUME UP or VOLUME DOWN once for each change in
loudness you desire. This level will remain set for background
music until you change it again, even if you turn off the feature
and then reactivate it.

Using The Other Telephone Features

GCA70–226

7 – 14 LCD Speakerphone Reference Manual

Содержание DigiTech 7700S Series

















































































































































Результаты поиска

Содержание DigiTech 7700S Series

Отзывы:

Comdial DigiTech 7700S Series, Справочное руководство, Страница: 66 / 144

Результаты поиска

Содержание DigiTech 7700S Series

Отзывы: